Sale!

Best❤️Robotbanao Combo for DIY Incubator, W1209 Thermostat + 12v 2Amp Adapter + 2 Piece 3 inch fan + 8 Pieces Ties 10” Inch + 1 DC Female Connector For Diy Incubator Temperature Sensor

503.43

Description

Price: [price_with_discount]
(as of [price_update_date] – Details)


[ad_1]

W1209: Inbuilt embedded micro-controller | NTC temperature sensor | Display current temperature | 3 digit 7 segment display || Fan: Noiseless | Low Current consumption || 12V Adapter: Short Circuit, Over Voltage & Over Current Protection | Low Fault Rates | No Minimum Load | Regulated center positive power supply | Single Output Voltage | Low ripple || Plastic Ties: Sturdy | Convenient | Self-locking || Female Jack: Universal design | Flexible and long lasting
Dimensions: W1209 (LxWxH): 48x40x14mm | Cable Length: 0.5 Meter | Measuring Inputs: NTC10K | Output Type: 1 Channel Relay Output || Fan (LxWxH): 80x80x25 mm | Wire length: 20cm || 12V Adapter: Output Plug: 5.5 mm DC plug | Input Plug: 2-Pin EU type || Plastic ties length: 10 inches || Female jack: Cable Length: 10 cm | 2.1mm inner diameter | 5.5mm outer diameter | Length: 16cm
The W1209 module can be used to measure and display temperature, turn any application On/Off based on temperature reading. Long pressing “+/-” resets all values to their default. The fan is commonly used to keep the system cool. The 12V power adapter is an industry power module that converts AC power to 12V 2A DC. The plastic ties can be used to tie electrical cables together to sort them. DC Female Jack can be used to connect a DC power wall wart to a board that does not have a DC Jack.
W1209: Temperature Control Range(°C): -50 to +110 | Resolution @-9.9°C to +99.9°C: 0.1°C | Resolution @all temperatures: 1°C | Accuracy: 0.1°C | Refresh Rate(s): 0.5 | Supply Voltage(V): 12 | Capacity: 10A || Fan: Current:0.25A | Wire Gauge:26AWG | RPM:2600RPM @12VDC | Air Flow:30.7 CFM || 12V Adapter: Input:100-240 VAC 50/60Hz | Input Voltage (V):100~280 VAC @50~60Hz | Input current (mA):100 | Output Power:12V 2A | Output:12V 2A || DC Female Jack: Voltage:12V | Shape:Cylindrical

[ad_2]

Reviews

There are no reviews yet.

Be the first to review “Best❤️Robotbanao Combo for DIY Incubator, W1209 Thermostat + 12v 2Amp Adapter + 2 Piece 3 inch fan + 8 Pieces Ties 10” Inch + 1 DC Female Connector For Diy Incubator Temperature Sensor”